Universal Ignitor Boards are for use in Furnaces, Refrigerators & Water Heaters. The UIB series boards come ready for use in Furnaces or a jumper on the board can be cut to make the board instant fire for use in Refrigerators or Water heaters. These universal 12 Volt DC ignitor boards are certified by Testing Engineers International to meet UL 372 and UL 353 specifications for use in the RV industry. The universal ignitor boards are all "electrically" identical but "mechanically" different for convenient installation

*Note: Fan control boards should not be used in DuoTherm® 900 series furnaces that have the thermostat in the ground circuit. DuoTherm® furnaces can be rewired to move the thermostat from the ground side of the circuit to the positive side of the circuit so that the Fan control features of the Fan control or FAN 50 Plus Pins board can be used. 

• Size: 3.25" x 4.25"
• Works in 12 VDC furnaces*
• Removable jumper for Instant fire operation in water heaters and refrigerators
• Superior Construction - "Plated and soldered through holes" to virtually eliminate intermittent connections.
• 3 Try - Tries 3 times to ignite gas, with appropriate purge cycles before going into lockout.
• Shuts the fan motor OFF a minute and a half after the 3rd ignition try fails to sense a flame
• Waits one hour and tries the cycle again before locking out requiring the thermostat to be reset.
• Microcontroller - Highly reliable microcontroller for accurate and stable operation.
• Diagnostic LEDs - UIB Series Igntior boards all have diagnostic LEDs to aid in troubleshooting
• Fuse protection - Replaceable 5 Amp automotive fuse to protect the board from short circuits on the Valve and NC terminals
• Made in the USA - All of the circuit boards are made in the US with quality first, in mind. Every board is tested before packaging.
• Three Year Warranty - Click this link more Information on Dinosaur's Outstanding 3 year Warranty.
• Duo-Therm/ Hydro-Flame/ Suburban Furnaces
  

Propane is an explosive gas! Ignitor boards should be installed by trained service technicians.